Описание

Технические данные — электрические параметры
Voltage supply 4.75…30 VDC
Reverse polarity protection Yes
Short-circuit proof Yes
Consumption w/o load 70 mA
Initializing time 30 ms after power on
Pulses per revolution 1…65536
Scan ratio 45…55 % typical at 2048 ppr
Reference signal Zero pulse 90° or 180°
Sensing method Optical
Output frequency 300 kHz (TTL) 160 kHz (HTL)
Output signals A+, B+, R+, A-, B-, R-
Output stages TTL/RS422 HTL/push-pull
Programmable parameters Output level TTL/HTL Pulse number 1…65536 Zero pulse width 90°/180° Zero pulse position Signal sequence
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-3
Approval UL 508 / CSA 22.2
Технические данные — механические параметры
Size (flange) 58 mm
Shaft type 8…15 mm (through hollow shaft)
Motor shaft tolerance 0.2 mm axial 0.03 mm radial
Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal)
Operating speed 3000 rpm (+20 °C, IP 67) 6000 rpm (+20 °C, IP 65)
Starting torque 0.02 Nm (+20 °C, IP 65) 0.025 Nm (+20 °C, IP 67)
Materials Housing: aluminium die-cast Flange: aluminium
Operating temperature -40…+100 °C
Relative humidity 90 % non-condensing
Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms
Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable
Weight approx. 300 g
''